GIZA-LL extrusion

Ref: C0758
  • Line of light in a shallow extrusion and flat cover
  • Possibility of bending the extrusion
  • Wide assortment of mounting accessories
  • Designed to reach an IP67 waterproof rating
Finish
Silver anodized
Technical specification
Application

- construction of lighting fixtures for main or decorative lighting

Assembly

- suitable for mounting on flat surfaces, suspending from DP fasteners, for attaching to mounting systems and 
  for fixing with mounting springs, to ARMSTRONG ceilings with the AM-24 mounting bracket

- compatible with a group of extrusions dedicated to drywall panels. It is designed for mounting in the TEKNIK-ZM and TEKUS extrusions using TEKNIK clips

Number of clips:

Extrusion length

39.4"(1 m)

78.75"(2 m)

118.11"(3 m)

Number of TEKNIK clips 8 18 28
Additional information

- can be mounted in a groove made using a mounting extrusion

- a line of light obtainable with the LIGER-22 cover and a LED strip with a minimum of 40 LEDs/foot  (120 LEDs/meter)

- GIZA-LL is designed for two or one 0.39" (10 mm) wide LED strip

 

Extrusion bending

 

Minimum internal radius

Minimum external radius

250 mm / 9.8” 

 350 mm / 13.8"

 

- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).

Possibility of making a linear fixture with IP64 protection, which means the fixture is dustproof and splashproof.
Achieving IP64 is possible with the following covers: LIGER-22, MUN-22 and HS-22

C0758
Ref. nr. surface finish available lengths
C0758ANODA_1 Silver anodized
39.4"
C0758ANODA_2 Silver anodized
78.75"
C0758ANODA_3 Silver anodized
118.11"
Technical drawing