LARKO-50 Extrusion

Ref: C0756
  • Simple mounting that does not require plastering and painting the surface afterwards
  • Possible to obtain a line of light
  • Designed to reach an IP65 waterproof rating
Silver anodized
Technical specification

- for creating serviceable straight and sectioned LED lighting fixtures, mounted in drywal


- uses dedicated KMA springs

Additional information

- line of light obtainable with the LIGER-50 cover and LED strips with a minimum of (36 LED/ft. / 120 LED/m) 
- designed for up to four (0.39" / 10mm) wide LED strips 
- the cover is evenly illuminated with four LED strips, with fewer strips shadows appear on the cover 
- LARKO-50 extrusion is equipped with ZM sockets on the inside and outside (ZM connectors used to connect
  extrusions lengthwise are easily accessible even after mounting the extrusion in the ceiling, external sockets
  are used to mount KMA springs)
- recommended number of springs (assembled in pairs) depending on the length of the extrusion:

Extrusion length 39.4" / 1m 78.7" / 2m
Number of KMA springs 6 10

- the groove cut out in the drywall to accommodate the extrusion should be (2.0"-2.2" / 51mm-56mm) wide
- when mounted in double drywall, the extrusion does not interfere with the structure

Possibility of making a linear fixture with IP65 protection, which means the fixture is dustproof and waterproof in contact with water jets.

Ref. nr. surface finish available lengths
C0756ANODA_1 Silver anodized
C0756ANODA_2 Silver anodized
Technical drawing