KOZUS-50 Extrusion

Ref: C0958
  • Possible to obtain a line of light
  • Concealed aluminum elements
  • The extrusion does not interfere with a structure made of 5/8 inch (about 16mm) thick drywall
  • Designed to reach an IP65 waterproof rating
Non anodized (raw)
Technical specification

- to create a line of light flush with the surface of walls and ceilings


- fixed in the groove with mounting adhesive
- extrusion fastening wings covered with gypsum plaster
- the protective insert TECH-50 ensures that the extrusion slot remains wide enough for the snap-in cover (its use is necessary during mounting and finishing works)

Additional information

- designed for up to four (0.39" / 10mm) wide LED strips
- line of light obtainable with the LIGER-50 cover and LED strips with a minimum of (36 LED/ft. / 120 LED/m) 
- the cover is evenly illuminated with four LED strips, with fewer strips shadows appear on the cover
- the KOZUS-50 extrusion is equipped with ZM sockets (ZM Connectors are used to connect extrusions lengthwise, they are easily accessible even after mounting the extrusion in the ceiling)
- the groove cut out in the drywall to accommodate the extrusion should be (2.0"-2.2" / 51mm-56mm) wide


Possibility of making a linear fixture with IP65 protection, which means the fixture is dustproof and waterproof in contact with water jets

Ref. nr. surface finish available lengths
C0958NA_1 Non anodized (raw)
C0958NA_2 Non anodized (raw)
Technical drawing