PDS-4-PLUS Extrusion

Ref: C1263
  • Minimum dimensions for 0.55" / 14 mm wide LED strips and to obtain a line of light
  • LED strips mounted quickly and securely with the 8-KLIK silicone sleeve
  • Easy and clean servicing of watertight LED strips in the extrusion (without tools or glue)
  • Multiple additional accessories
  • Designed to reach an IP67 waterproof rating
Silver anodized
Technical specification

- multipurpose
- designed for the construction of indoor lighting fixtures with increased ingress protection


- with mounting accessories from KLUŚ
- with fixing glues, professional double-sided adhesive tapes

Additional information

- line of light obtainable with the LIGER cover an LED strip with at least (36LED/F 120 LED/m), (3W/F 9.6W)
- spece for LED strip: 0.55" / 14 mm

Extrusion bending

- can be bent in the plane adjacent to the LED strip

Minimum internal radius

Minimum external radius

 180 mm / 7.1”

 200 mm / 7.8”


- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).


Possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof.

Ref. nr. surface finish available lengths
C1263ANODA_2 Silver anodized
Technical drawing