PDS-H Extrusion

Ref: B9204ANODA

The PDS-H has a structure and cross-section very similar to PDS-4-ALU and utilizes the concealed PDS-H mounting bracket.

  • Allows aesthetic assembly with concealed mounting brackets
  • Minimum dimensions to obtain a line of light
  • ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
Finish
Silver anodized
Technical specification
Application

- designed for the construction of lighting fixtures mounted to horizontal surfaces: mainly under cabinets, shelves (kitchens, libraries, furniture)
- clean shape, not distorted by technical detail, such as an external mounting bracket

Assembly

- with plastic mounting brackets attached to mounting surface with bolts

Mounting
Push the profile into the already mounted mounting brackets until you hear a click.

Additional information

- can be equipped with transparent and frosted covers, aluminum-colored and metalized plastic end caps

Its distinctive feature is hooks in the outer part of the profile bottom, which together with dedicated mounting brackets are used for mounting the profile. After mounting, the brackets are concealed due to the shape of the profile cross-section.

NOTE! There are no end caps fitting the “S” cover used with the PDS - H extrusion.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

B9204ANODA
Ref. nr. surface finish available lengths
B9204ANODA_1 Silver anodized
39.4"
B9204ANODA_2 Silver anodized
78.75"
B9204ANODA_3 Silver anodized
118.11"
Technical drawing