PDS-ZM Extrusion

Ref: B7696ANODA

Patent Number: US D807,572 S

  • Equipped with a small lock that allows the use of system fasteners and extrusion connectors
  • Multiple applications
  • ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
  • Designed to reach an IP67 waterproof rating
Silver anodized
Technical specification

- for use in interior architecture in numerous configurations
- small lock facilitates building long linear, suspended, and polygonal lighting fixtures
- the sealed version can be used in external applications


- mounted to the surface with appropriate mounting adhesives, mounting springs or screws
- can be suspended using UCHO-ZM eye hangers, PUSZ system

Additional information

- the extrusion is suitable for bending into gentle arches, in the plane adjacent to the LED strip
- can be equipped with transparent and frosted covers, as well as aluminum-colored or metallized plastic end caps
- spece for LED strip: 0.55" / 14 mm

The side surfaces of the extrusion are smooth, without heat sinks. There is a ‘small lock’ on top of the extrusion which enables you to connect extrusions into extended polygonal lighting fixtures.


Extrusion bending with covers: HS, LIGER, KA, K-BIS


Minimum internal radius

Minimum external radius

 400 mm / 157.5”

400 mm / 157.5” 


- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).


Possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof.

Ref. nr. surface finish available lengths
B7696ANODA_1 Silver anodized
B7696ANODA_2 Silver anodized
B7696ANODA_3 Silver anodized
Technical drawing