OPAC-30 Extrusion

Ref: B6164ANODA

OPAC-30 extrusion is used to build flat fixtures with large shielding collars.

  • Masking the uneven edges of grooves
  • Easy mounting
  • Profile height not exceeding the thickness of drywall
  • Designed to reach an IP65 waterproof rating
Silver anodized
Technical specification

- construction of lighting fixtures in shallow grooves


- in grooves with KMA mounting springs or with mounting adhesive.

Additional information

- wide flange not requiring a precise groove

OPAC-30 extrusion is used to build flat fixtures with large shielding collars.Designed for mounting in slots made in dry-wall, flush with its surface and not exceeding their thickness. The smallest depth of the mounting slots for OPAC-30 is 9 mm (0.35"). In dry-wall ceilings, the extrusion can be mounted using KMA mounting springs.

The extrusion can fit two 10 mm (0.39") - wide LED strips or one LED strip with a width of more than 10 mm (0.39") but not greater than 21 mm (0.82").

Possibility of making a linear fixture with IP65 protection, which means the fixture is dustproof and waterproof in contact with water jets.
Achieving IP65 is possible with the following covers: LIGER-22, MUN-22 and HS-22.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
B6164ANODA_1 Silver anodized
B6164ANODA_2 Silver anodized
Technical drawing