PULA Extrusion

Ref: 18035ANODA

PULA is an aesthetic constructional extrusion, which allows mounting and illuminating shelfs made of glass, wood or plastic. 

  • Mounting can be adjusted to the thickness of the shelf
  • Double independent lighting modes - edge and surface
  • ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
Silver anodized
Technical specification

- mounting and illumination of shelves made of glass and other materials

PULA extrusion can be used in architecture, interior decoration or during exhibitions.


- on a mounting strip with screws appropriately selected for the surface
- shelf mounted in the extrusion with adjustable spacing

PULA consists of two extrusions: TEPULA mounting track (attached to the wall) and bent into a curved shape MAPULA extrusion, set in the mounting track. Both extrusions are connected with the ability to regulate the distance between their edges every (0.08" / 2 mm), so they can be adjusted to shelfs with thickness between (0.23" / 6 mm) and (0.78" / 20 mm). Such fixture can support weight up to 11lb on length of (11.8" / 30 cm). Maximum width of the shelf is (9.84" / 25 cm).

Additional information

- the extrusion can also be used as a shelf attachment without backlighting
- spece for LED strip: 0.44" / 11.2 mm

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
18035ANODA_1 Silver anodized
18035ANODA_2 Silver anodized
Technical drawing