REGULOR Extrusion

Ref: B468+43ANODA

Patent Number: US D698,075 S

  • A movable insert for LEDs enabling four different lighting angles
Finish
Silver anodized
Technical specification
Application

- extrusion for construction of surface mounted fixtures with a focused beam of light

Assembly

- with screws appropriately selected for the surface
- with mounting brackets
- with suspension accessories
- with mounting adhesives

Additional information

- the insert setting adjustment enables 10, 30, 60 and 90 degree beam angles
- eliminates obstacles related to LED light strip mounting
- extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
- extrusion can be made waterproof ( IP 67 ) and be used as an outdoor lighting for elevations or architectural elements of gardens

 

Profile bending

 

Minimum internal radius

Minimum external radius

 150 mm /  5.9"

 250 mm / 9.8”

 

- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the profile bent so that the cover is facing the inside of the arch.

- External radius - refers to the profile bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized profiles, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).

 

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

B468+43ANODA
Ref. nr. surface finish available lengths
B468+43ANODA_1 Silver anodized
39.4"
B468+43ANODA_2 Silver anodized
78.75"
B468+43ANODA_3 Silver anodized
118.11"
Technical drawing