STOS-ALU Extrusion

Ref: B4369ANODA

Extrusion is dedicated to be mounted to surfaces such as shelving, ceilings, cabinets etc.

Patent Number: US D662,255 S

  • Simple design and functionality
  • Modern design, environment friendly
  • Designed to reach an IP67 waterproof rating
Silver anodized
Technical specification

- used as interior lighting, surface mount extrusion: shelving, ceilings, cabinets etc.


- using screws properly selected for the mounting surface and placed under the LED strip
- on the mounting strip mounted to the surface with properly selected screws

Additional information

- the extrusion fits dedicated mounting strips
- maximizes the applications and uses available for LED light strips
- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
- spece for LED strip: 0.48" / 12.2 mm


Extrusion bending with covers: HS-12, K-12


Minimum internal radius

Minimum external radius

 200 mm / 7.8”

250 mm / 9.84 


- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusion, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).


Possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
B4369ANODA_1 Silver anodized
B4369ANODA_2 Silver anodized
Technical drawing