TETRA-78 Mounting Track

Ref: W4508ANODA

Easy and fast mounting of TRIADA fixture groove for cable routing

  • Simplifies mounting the TRIADA light fixture and provides space to conceal wires
Finish
Silver anodized
Technical specification
Application

- mounting a dedicated lighting fixture with a cable gland

Assembly

- surface mounted with appropriately selected screws for the mounting surface
- the dedicated lighting fixture is snapped into the mounting strip

TETRA-78 mounting track is a mounting strip for TRIADA extrusion. After TETRA-78 and TRIADA have been mounted, we obtain a groove inside high enough to route (0.31" / 8 mm) Fi cables in it. TRIADA extrusion is attached to TETRA-78 strip with TEKNIK clips, arranged in pairs. The pairs of the clips should be applied every (7.87" / 20 cm).

TETRA-78 has its own end cap, which nicely complements the shape of TRIADA end cap. TETRA-78 track is mounted using suitable screws. The location of the drilling of holes for screws is marked by the groove inside the extrusion.The mounting surface for TETRA-78 should be even. If there is some major roughness of the surface, mounting screws should be located in the places of extrusion-surface adhesion (bumps).

Additional information

- the space inside the strip is (0.25" / 6.6 mm)

W4508ANODA
Ref. nr. surface finish available lengths
W4508ANODA_1 Silver anodized
39.4"
W4508ANODA_2 Silver anodized
78.75"
Technical drawing