TETRA-43 Mounting Track

Ref: W4476ANODA

Easy and fast mounting of TRIADA fixture groove for cable routing

  • Simplifies mounting the TRIADA light fixture
Finish
Silver anodized
Technical specification
Application

- mounting a dedicated lighting fixture by snapping it

Assembly

- surface mount with appropriately selected screws for the mounting surface
- the dedicated lighting fixture is snapped into the mounting strip

TETRA-43 mounting track is a low (0.16" / 4,3 mm) mounting strip for TRIADA extrusion. After TETRA-43 and TRIADA have been mounted, we obtain a low internal groove in which a (0.19" / 5 mm) Fi cable can be routed.

TRIADA extrusion is attached to TETRA-43 strip with TEKNIK clips, arranged in pairs. The pairs of the clips should be applied every (7.87" / 20 cm). TETRA-43 has its own end cap, which nicely complements the shape of TRIADA end cap. 

TETRA-43 track is mounted using suitable screws. The location of the drilling of holes for screws is marked by the groove inside the extrusion. The mounting surface for TETRA-43 should be even. If there is some major roughness of the surface, mounting screws should be located in the places of extrusion-surface adhesion (bumps).

Additional information

- the space inside the strip is (0.12" / 3.1 mm)

 

Extrusion bending

 

Minimum internal radius

Minimum external radius

 150 mm / 5.9"

150 mm / 5.9" 

 

- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating
  (which may be more or less visible depending on the radius).

W4476ANODA
Ref. nr. surface finish available lengths
W4476ANODA_1 Silver anodized
39.4"
W4476ANODA_2 Silver anodized
78.75"
Technical drawing