TEST-74 Mounting Track

Ref: W4507ANODA

Easy and fast mounting of STOS fixture groove for cable routing

  • Simplifies mounting a dedicated lighting fixture and provides space to conceal wires
Finish
Silver anodized
Technical specification
Application

- mounting of a dedicated lighting fixture with a cable gland, by snapping it into the mounting track

Assembly

- on screws appropriately selected for the mounting surface
- the dedicated lighting fixture is snapped into the mounting strip

TEST-74 mounting track is a mounting strip for STOS extrusion. After TEST-74 and STOS have been mounted, we obtain a groove inside high enough to route (0.23" / 6 mm) Fi cables in it. 

STOS extrusion is attached to TEST-74 strip with TEKNIK clips, arranged in pairs. The pairs of the clips should be applied every (7.87" / 20 cm). TEST-74 has its own end cap, which nicely complements the shape of STOS end cap. 

TEST-74 track is mounted using suitable screws. The location of the drilling of holes for screws is marked by the groove inside the extrusion. The mounting surface for TEST-74 should be even. If there is some major roughness of the surface, mounting screws should be located in the places of extrusion-surface adhesion (bumps).

Additional information

- the space inside the strip is (0.24" / 6.2 mm)

W4507ANODA
Ref. nr. surface finish available lengths
W4507ANODA_1 Silver anodized
39.4"
W4507ANODA_2 Silver anodized
78.75"
Technical drawing