TEST-36 Mounting Track

Ref: B6639ANODA

Easy and fast mounting of STOS fixture groove for cable routing

  • Simplifies mounting the STOS light fixture
Silver anodized
Technical specification

- mounting of a dedicated lighting fixture by snapping it in


- surface mount with screws appropriately selected for the mounting surface
- the dedicated lighting fixture is snapped into the mounting strip

TEST-36 mounting track is a low (0.14" / 3,6 mm) mounting strip for STOS extrusions. After the TEST-36 and STOS have been mounted, we obtain a low internal groove in which a 2 mm (0.07") Fi cable can be routed. The STOS extrusion is attached to the TEST-36 strip with TEKNIK clips, arranged in pairs. The pairs of clips should be applied every (7.87" / 20 cm). TEST-36 has its own end cap, which nicely complements the shape of the STOS end cap.

The TEST-36 strip is mounted using suitable screws. The location for drilling screw holes is marked by the groove inside the extrusion. The mounting surface for TEST-36 should be even. If there is major roughness of the mounting surface, the mounting screws should be located in the areas where the extrusion meets the surface (bumps).

Additional information

- the space inside the strip is (0.09" / 2.4 mm)

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
B6639ANODA_1 Silver anodized
B6639ANODA_2 Silver anodized
Technical drawing