LIPOD Extrusion

Ref: B5554ANODA

Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall.

Patent Number: US D724,259S

  • Ability to create a line of light
  • Easy mounting using various techniques
  • Can be combined in straight and broken linear runs
  • ETL listed and approved for installation in all closet storage areas when factory built by KLUS as fixtures with 4.5w/ft or less.
Finish
Silver anodized
RAL
Technical specification
Application

- surface mounted or suspended lighting fixtures

Assembly

- using surface springs
- using suspension accessories
- using mounting adhesive

Additional information

- ability to construct polygonal fixtures using ZM connectors

Architectural extrusions for LED tape – dedicated to be mounted into ceilings and drywall. The height of the extrusion was designed to produce a single line of light with LEDs spaced 15 mm (0.59") apart and a frosted cover HS 22. The extrusion can accomodate two of the 10 mm (0.39") wide LED strips. Extrusion can be mounted to a surface with the use of mounting springs.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

B5554ANODA
Ref. nr. surface finish available lengths
B5554ANODA_1 Silver anodized
39.4"
B5554ANODA_2 Silver anodized
78.75"
B5554ANODA_3 Silver anodized
118.11"
B5554L9010_3 White
118.11"
B5554K7_3 Black
118.11"
Technical drawing