LOKOM Extrusion

Ref: B5553ANODA

Patent Number: US D724,260S

  • Ability to create a line of light
  • Easy assembly and disassembly
  • Can be combined in straight and broken linear runs
  • Simple design
  • Designed to reach an IP65 waterproof rating
Silver anodized
Technical specification

- main lighting installation in existing drywall structures


- mounted with clips in the mounting extrusion

Additional information

- minimal flange effectively masks the mounting gap
- spece for LED strip: 0.95" / 24.2 mm

Extrusion bending

Minimum internal radius

Minimum external radius

 3000 mm / 118.1”

3000 mm / 118.1” 


- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).


Possibility of making a linear fixture with IP65 protection, which means the fixture is dustproof and waterproof in contact with water jets.
Achieving IP65 is possible with the following covers: LIGER-22, MUN-22 and HS-22.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
B5553ANODA_1 Silver anodized
B5553ANODA_2 Silver anodized
Technical drawing