MICRO-K Extrusion

Ref: B3775ANODA

Small dimensions (just 6 mm; 0.23" high), extrusion can fit slim design and thin furniture pieces, special collar of the profile enables unaesthetic grooves to be covered (groove - a specially prepared narrow space in the surface) easy assembly, lightweight, easily releases heat.

Patent Number: US D623,343 S

  • Recessed shallow housing for LED strips up to 0.39" / 10mm wide
  • Masks the edges of the groove
  • Designed to reach an IP67 waterproof rating
Finish
Silver anodized
Technical specification
Application

- construction of lighting fixtures incorporated as furniture lighting
- indoor: grooves (profile can fit slim design and thin furniture pieces, wall surfaces, drywalls)

Assembly

- with mounting adhesive and professional double-sided adhesive tapes

Additional information

- can be sealed for outdoor use
- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
- spece for LED strip: 0.44" / 11.3 mm

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Extrusion bending

 

Minimum internal radius

Minimum external radius

 150 mm / 5.9"

150 mm / 5.9" 

 

- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).

 

Possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof.

B3775ANODA
Ref. nr. surface finish available lengths
B3775ANODA_1 Silver anodized
39.4''
B3775ANODA_2 Silver anodized
78.75''
Technical drawing