KWP-LV-1213-120V LED tape, 315-350 lm/ft, IP65, (KWP-LV-1213-120V)

Compare

Compared

Dimensions:

Width [W]: 0.6" (16.5 mm)

Height [H]: 0.3" (7 mm)

Max run length [L]: 164'00" (50 m)

Cut every [C]: 3.9" (100 mm)

LED spacing: 0.3" (8.33 mm)

Line Voltage, 120V
Overvoltage, overload and short circuit protection
TRIAC dimmer compatible
Continuous long runs without a driver
Factory attached 72” leads
Dimming Capability 10%

Description

Line Voltage, 120V
Overvoltage, overload and short circuit protection
TRIAC dimmer compatible
Continuous long runs without a driver
Factory attached 72” leads
Dimming Capability 10%

Additional information

- WARNING: When using this product outdoors, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet.
- WARNING: Do not puncture, cut, shorten, or splice this product.
- WARNING: Do not use if there is any damage to the light or cord insulation.
- WARNING: Do not submerge this product in liquids, or use the product in the vicinity of standing water.
- NOT FIELD CUTTABLE
- Total Lenth of LV End Cap: 56mm on lead wire side, 15mm on non-lead wire side (This is the length that will stick out of the dedicated mounting track / cover) Length of LV End Cap beyond requested Length: 42mm on lead wire side, 3mm on non-lead wire side(this is the length that will be unlit)

download

Description
download

Additional information

- WARNING: When using this product outdoors, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet.
- WARNING: Do not puncture, cut, shorten, or splice this product.
- WARNING: Do not use if there is any damage to the light or cord insulation.
- WARNING: Do not submerge this product in liquids, or use the product in the vicinity of standing water.
- NOT FIELD CUTTABLE
- Total Lenth of LV End Cap: 56mm on lead wire side, 15mm on non-lead wire side (This is the length that will stick out of the dedicated mounting track / cover) Length of LV End Cap beyond requested Length: 42mm on lead wire side, 3mm on non-lead wire side(this is the length that will be unlit)

Technical drawing

Technical specification

IP protection rating

Sealing type

silicon sleeve

CRI

Input voltage

120 V AC

Power consumption

3.7 W/ft

Beam angle

120°

Height [H]

0.3" (7 mm)

Width [W]

0.6" (16.5 mm)

Cut every [C]

3.9" (100 mm)

LED spacing

0.3" (8.33 mm)

Minimum bending radius R

2.3"

Number of LEDs per 1 ft

Number of LEDs per cut section

8 pcs

Max run length [L]

164'00" (50 m)

Dimmable

Yes

UV radiation resistance

Yes

Working temperature

-4°F - 114.8°F

LED color	LED output	Efficiency	Ref No
2700K	315 lm/ft	85 lm/W	KWP-LV27-1213-120V
3000K	330 lm/ft	89 lm/W	KWP-LV30-1213-120V
3500K	334 lm/ft	90 lm/W	KWP-LV35-1213-120V
4000K	350 lm/ft	95 lm/W	KWP-LV40-1213-120V
5000K	350 lm/ft	95 lm/W	KWP-LV50-1213-120V

KWP-LV-1213-120V LED tape, 315-350 lm/ft, IP65, 3.7 W/ft