TRIADA Extrusion

Ref: B4476ANODA

The three-channel extrusion provides higher light output.

Patent Number: US D695,953 S

  • Construction of high-performance lighting fixtures
  • Good heat dissipation
  • Three-channel housing for LED strips up to 0.47" / 12 mm wide
  • Multi-purpose
  • Designed to reach an IP67 waterproof rating
Silver anodized
Technical specification

- used as interior lighting, especially to light cabinets, glass-cases, or as a decoration light for a niche in drywall ceilings
- due to the possibility of installing three strips inside the extrusion it can be used as a primary energy-efficient light source


- with screws appropriately selected for the mounting surface, on dedicated mounting strips
- with mounting adhesives appropriately selected for the surface

Additional information

The three-channel extrusion provides more light output. IP 67 version can be also used as an outdoor lighting for elevations or architectural elements of gardens.

- eliminates obstacles related to LED light strip mounting
- extrusion acts as the connector between the light source and the application area and provides a stylish and finished look
- lighting or illumination of certain areas (stream of light may vary depending on the power of applied LEDs)
- spece for LED strip: 3 x 0.51" / 13.1 mm


Extrusion bending

Minimum internal radius

Minimum external radius

 200 mm / 7.8”

200 mm / 7.8” 


- Minimum radius – bending radius which when exceeded causes destruction
  (deformation, bending or lack of compatibility with other accessories, e.g. covers, end caps, etc.) of the profile.

- Internal radius – refers to the extrusion bent so that the cover is facing the inside of the arch.

- External radius - refers to the extrusion bent so that the cover is facing the outside of the arch.

- Irregular curves are possible after consultation and individual quotation.

- When bending anodized extrusions, one should be aware of cracking of the anode coating (which may be more or less visible depending on the radius).


Possibility of making a linear fixture with IP67 protection, which means the fixture is dustproof and waterproof.

Turn off LED lights during peak day light hours in outdoor applications to avoid excessive heat buildup which will result in diminished LED life.

Ref. nr. surface finish available lengths
B4476ANODA_1 Silver anodized
B4476ANODA_2 Silver anodized
Technical drawing